Arial
Wingdings
Monotype Sorts
Symbol
Display
Stair Stair
Building Envelope Building Envelope
Ornamental staircase. Handrails can be shown or hidden.
Vis_PShr.chm!#26893 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Resize Lower Handrail Extension
C@Fi4 Resize Upper Handrail Extension
Resize Stair Angle
Reposition Text
Show Handrails Hide Handrails User.HideRail
Show Stair Break Hide Stair Break User.HideBreak
%_P&roperties
Hide Handrails
Show Stair Break
Number of Treads (Maximum of 8)
Hide Upper Stair
Hide Lower Stair
Building Component
Stair
Stair Flight Run `)Enter the length of the stair flight run.
Stair Width `!Enter the width of the staircase.
Number of Treads (Maximum of `4Enter the number of treads for the stair flight run.
`%Length of Ornamentation (From Bottom) `OEnter the length of the ornamentation detail, from the bottom of the staircase.
Building Component ShapeClass `.String value of User.ShapeClass for reporting.
Stair ShapeType `-String value of User.ShapeType for reporting.
SubShapeType `0String value of User.SubShapeType for reporting.
Classification `@Enter the identifier, as specified by the classification source.
Classification source `JEnter the name of the specific standard or system used for classification.
Purpose `'What is the primary use for this stair?
Fire rating `)Enter the designer specified fire rating.
Exit stair? `:Is this stair counted for building code exit requirements?
`,Enter the code minimum width for each tread.
`=Enter the code minimum length for the top handrail extension.
`@Enter the code minimum length for the bottom handrail extension.
`/Enter the code minimum width for the staircase.
Controls.X3 Width-User.OrnamentPosition
`4Enter the code minimum run length for the staircase.
`?Contains the maximum number of treads for the given stair size.
`0Contains the actual number of stair treads drawn
`3Contains the width for each individual stair tread.
`'Controls the visibility of treads 1-16.
`(Controls the visibility of treads 17-32.
` Toggles visibility of handrails.
`"Toggles visibility of stair break.
`BContains the extension of the bottom handrail (from edge of stair)
`?Contains the extension of the top handrail (from edge of stair)
Controls.Y3
Q(-DTû Q(-DTû ÀQ(-DT
Controls.X1
Controls.X2 Width--
staircase, ornamental
`bOrnamental,stair,staircase,Handrails,shown,hidden,Building,Core,lifts,floor,charts,treads,landings
`&{5D50005D-537C-4738-9C46-130C74335A6D}
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
"@F^Lm 8NOK@
Straight single-flight staircase.
taircase.
Vis_PShr.chm!#26895 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Resize Upper Handrail Extension Resize Lower Handrail Extension
Resize Lower Handrail Extension Resize Upper Handrail Extension
Show Stair Segment Hide Stair Segment User.HideSegment
Stagger Stair Flight User.StaggerStep User.StaggerCtls
Swap Direction User.SwapDir
Hide Stair Break
Flight Separation (Minimum of 25MM.)
Hide Stair Segment
Number of Treads per flight (Maximum of 8)
Resize Upper Handrail Extension
up
down
Stair Flight Run `.Enter the length of a single stair flight run.
Stair Flight Width `"Enter the width of each staircase.
Flight Separation (Minimum of `4Enter the number of treads for the stair flight run.
`(Number of Treads per flight (Maximum of `4Enter the number of treads for the stair flight run.
`$Toggles visibility of stair segment.
`>Toggles travel of stair segment- to indicate ascent or descent
Height
Controls.X2
Prop.Width
Controls.X1 Controls.X4 Controls.X2 Controls.X5 Controls.X4 Controls.X1 Controls.X5 Controls.X2
staircase, scissor
`_Scissor,staircase,Straight,single,flight,Building,Core,lifts,floor,charts,stair,treads,landings
esc(0)
E1@Fxj
` $xas
g2@Rc?
an8@F/
8NOK@
@Fxj
W/@Fe/³7¶g2@Rc?
pK;*@F
``B1@Fxj
R/@Fe/³7¶g2@Rc?
ye @F 8NOK@
Single-flight staircase. Handrails and stair break can be shown or hidden.
Vis_PShr.chm!#26903 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Show Upper Stair Hide Upper Stair User.HideTop
Show Lower Stair Hide Lower Stair User.HideBottom
Stair Flight Run (Minimum of 2000MM.)
Stair Width (Minimum of 1000MM.)
Stair Flight Run (Minimum of `)Enter the length of the stair flight run.
Stair Width (Minimum of `!Enter the width of the staircase.
`'Selects upper or lower segment to hide.
`FContains logic to control the filler segment present for a half-stair.
Controls.X2 Width+
User.HideSegment User.HideTopBottom User.HideTopBottom User.HideSegment
staircase, straight
`tStraight,staircase,Single,flight,Handrails,stair,break,shown,hidden,Building,Core,lifts,floor,charts,treads,landings
D1@FM&
L4@`vO
OOK@
CW/@F
d24@`vO
CW/@Fú|>ŸÏg2@Rc?
Ask on drop `MAsk for various shape properties when shapes are dropped on the drawing page. visXAsk
Spiral staircase. Can be set as ascending or descending. Handrails can be shown or hidden.
Vis_PShr.chm!#26896 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Show Handrails Hide Handrails User.HandrailVis
Set as Descending Set as Ascending User.SetAscending
Set as Descending
Width
staircase, spiral
`wSpiral,staircase,set,ascending,descending,Handrails,shown,hidden,Building,Core,lifts,floor,charts,stair,treads,landings
Stairs that compute riser, going and number of treads based on floor-to-floor distance.
Right-click to change measurements.
Vis_PShr.chm!#26882 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
_Hide Text Block _Show Text Block HideText HideText
`,Enter the total distance from foor to floor. Floor to floor height
`IEnter target riser height to be used in calculating the number of risers. Target Riser
Number of risers needed. No. of risers (DO NOT EDIT)
`fActual height of each riser. Calculated by dividing the floor to floor height by the number of risers. Actual riser (DO NOT EDIT)
ue]YW$@ `KWidth of each tread. Calculated from the rule of thumb: 2*riser + tread = Tread size (DO NOT EDIT)
Pitch Adjustment `zTread + 2*Riser Should be greater than 550mm and less than 700mm. Adjust if calculated stairs are too shallow or steep.
Exit stair? `GEnter true if the stair is counted for building code exit requirements.
ue]YW$@
_Hide Text Block
Width of each tread. Calculated from the rule of thumb: 2*riser + tread = 625mm
625mm
Actual riser =
esc(7)
Number of risers =
esc(2)
Actual tread =
`!Rule of Thumb = 24.5in. or 625mm.
staircase
`uCalculated,stairs,compute,riser,going,number,treads,based,on,floor,distance,Building,Core,lifts,charts,stair,landings
Stair Flight Stair Flight
Stair section. Tread width is adjustable.
ch to add more stairs.
dd more treads.
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PShr.chm!#26899
Change Step Width
controls.x1 controls.x1
`UStair,section,Tread,width,adjustable,Building,Core,lifts,floor,charts,treads,landings
Stair Flight ShapeType `-String value of User.ShapeType for reporting.
Width Enter the flight width.
Number of steps `.Enter the number of steps in the stair flight.
Step rise Enter the rise for the steps.
Step run Enter the run for the steps.
Flight rise `+Enter the rise for the entire stair flight.
Flight run `*Enter the run for the entire stair flight.
Headroom `.Enter the clear headroom for the stair flight.
Stair Flight
Up or down arrow for indicating stair direction. Direction can be specified.
tion.
@HIO
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PShr.chm!#26897
Up Arrow User.Index
Down Arrow User.Index
`cStair,direction,Up,down,arrow,indicating,specified,Building,Core,lifts,floor,charts,treads,landings
Annotation
Annotation ShapeClass `.String value of User.ShapeClass for reporting.
ShapeType `-String value of User.ShapeType for reporting.
Landing Landing
Stair landing.
landing.
ight staircase.
UUUUU
Vis_PShr.chm!#26898 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Show E&xit Width Actions.C1
Sho&w Stair Stagger User.Stagger
Length `(Enter the desired depth for the landing.
Width Enter the width of the landing.
0 Steps;1 Step;3 Steps 0 Steps Number of Steps `3Enter the desired number of stairs for the landing.
Stair Flight Separation `3Enter the separation between the flights of stairs.
Landing ShapeType `-String value of User.ShapeType for reporting.
Landing thickness `AEnter the measurement from the top surface to the bottom surface.
Headroom `aEnter the measurement from the top of the landing to the bottom of the ceiling above the landing.
Top elevation `-Top elevation relative to the building floor.
stair landing
`>Stair,landing,Building,Core,lifts,floor,charts,treads,landings
Landing
Number of steps and type of landing can be specified.
e between a square or round landing.
ding.
Vis_PShr.chm!#26885 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
0 Steps User.NumSteps
2 Steps User.NumSteps
3 Steps User.NumSteps
_Square Landing User.Square
Round Landing User.Square
`aCorner,landing,Number,steps,type,specified,Building,Core,lifts,floor,charts,stair,treads,landings
Set the number of steps for the landing.
Set landing to be square or round.
Length ` Enter the length of the landing.
Flow Equipment Flow Equipment
Can be set as ascending or descending. Escalator break can be shown or hidden.
Vis_PShr.chm!#26888 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Set as Ascending Set as Descending User.SetDescending
Show Escalator Break Hide Escalator Break User.HideBreak
Properties
Hide Escalator Break
Number of Treads (Maximum of 16)
Escalator Width (Minimum of 1000MM.)
Escalator Flight Run (Minimum of 4000MM.)
Flow Equipment
Escalator
`!Escalator Flight Run (Minimum of `-Enter the length of the escalator flight run.
Escalator Width (Minimum of `!Enter the width of the escalator.
Number of Treads (Maximum of `8Enter the number of treads for the escalator flight run.
Flow Equipment ShapeType `-String value of User.ShapeType for reporting.
Escalator SubShapeType `0String value of User.SubShapeType for reporting.
Manufacturer Enter the manufacturer's name.
Model ID or tag `4Enter the manufacturer's model number or identifier.
Model name `$Enter the manufacturer's model name.
List of options `CEnter the manufacturer's options. Separate the options with commas.
Catalog URL `IEnter the Web page address for the manufacturer's online product catalog.
Base elevation `"Base elevation height above floor.
escalator
`lEscalator,set,ascending,descending,break,shown,hidden,Building,Core,lifts,floor,charts,stair,treads,landings
an8@F
2@F|Yi
E1@Fy
#@Fvv
@F|Yi
gHR/@F
FFV^bde @F_ OOK@
``B1@Fy
Railing Railing
Resizable handrail for staircases. Place against wall.
ection.
Vis_PShr.chm!#26891 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
corner hand rail
`qHand,rail,Resizable,handrail,staircases,Place,against,wall,Building,Core,lifts,floor,charts,stair,treads,landings
Railing ShapeType `-String value of User.ShapeType for reporting.
Handrail SubShapeType `0String value of User.SubShapeType for reporting.
Top elevation `<Enter the measurement from the floor to the top of the rail.
List of options `&Enter options in comma-separated list.
Railing
Handrail
Ramp Ramp
Rise and slope can be entered, run will be calculated.
ated. Right-click to change dimensions.
pUUUUU4@Z
Vis_PShr.chm!#26894 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
User.HideDims _Hide Dimensions _Show Dimensions
_Hide Dimensions
500 mm Rise: 6000mm. Run
Ramp
Index of slope selection
ramp
`]Ramp,Rise,slope,entered,run,calculated,Building,Core,lifts,floor,charts,stair,treads,landings
Slope Select a slope for the ramp. visRamp0
Rise `.Enter a rise for the ramp. Maximum is 760 mm. visRamp1
Rise: Run
Ramp ShapeType `-String value of User.ShapeType for reporting.
Purpose `&What is the primary use for this ramp?
Handicap accessible? `QEnter true if the ramp is handicap accessible, according to local building codes.
Counter Or Shelf Counter Or Shelf
Fixture Fixture
Countertop. Cabinet length and depth can be specified.
depth.
Vis_PShr.chm!#26907 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
_Show Drawer Clearance
Select standard size from list, or type in custom size.
Counter Or Shelf
Counter Top
Width Prop.Width
Height Prop.Depth
base cabinet, straight
`qWashroom,counter,Countertop,Cabinet,length,depth,specified,Building,Core,lifts,floor,charts,stair,treads,landings
(Size Manually) `gSelect standard size from list, type in custom size, or select (Size Manually) to resize using handles. Length `6(Size Manually);800mm.;1200mm.;1600mm.;1800mm.;2000mm.
(Size Manually) `1Enter the measurement from the front to the back. Depth `,(Size Manually);550mm.;600mm.;800mm.;1000mm.
Counter Or Shelf ShapeType `-String value of User.ShapeType for reporting.
Counter Top SubShapeType `0String value of User.SubShapeType for reporting.
Height `HEnter the measurement from the floor to the top of the counter or shelf.
Counter/Shelf type ID `2Enter the project ID for the type of construction.
Thickness `1Enter the measurement from the bottom to the top.
Type description `"Describe the type of construction.
L-shaped counter. Cabinet width and depth can be specified.
S@BK
Vis_PShr.chm!#26908 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Set Cabinet Depth
Height Prop.Height
Controls.X1 Prop.Depth
Controls.X1 Controls.X1
base cabinet, corner
`lWashroom,counter,shaped,Cabinet,width,depth,specified,Building,Core,lifts,floor,charts,stair,treads,landings
Length `gSelect standard size from list, type in custom size, or select (Size Manually) to resize using handles. (Size Manually) `6(Size Manually);800mm.;1200mm.;1600mm.;1800mm.;2000mm.
Height `HEnter the measurement from the floor to the top of the counter or shelf. (Size Manually) `6(Size Manually);800mm.;1200mm.;1600mm.;1800mm.;2000mm.
Depth `,(Size Manually);550mm.;600mm.;800mm.;1000mm. `1Enter the measurement from the front to the back.
Plumbing Fixture Plumbing Fixture
Oval-shaped sink. Drag on top of a countertop.
Vis_PShr.chm!#26886 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
sink, oval
`^Countertop,sink,Oval,shaped,Drag,on,top,Building,Core,lifts,floor,charts,stair,treads,landings
Index of prop.SubType value
&Flip Orientation FlipY
Oval Sink
Circular Sink
Plumbing Fixture ShapeType `-String value of User.ShapeType for reporting.
Sink SubShapeType `0String value of User.SubShapeType for reporting.
Sink Type `-Specify whether the sink is circular or oval. Circular;Oval Circular visSink0
Top elevation `!Top elevation height above floor.
Plumbing Fixture
Sink
Handrail for bathroom stall. Place edges in corner against walls.
inst walls.
Vis_PShr.chm!#26884 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`yCorner,hand,rail,Handrail,bathroom,stall,Place,edges,against,walls,Building,Core,lifts,floor,charts,stair,treads,landings
Non-Movable Furnishings Non-Movable Furnishings
Built in Accessory Built in Accessory
Place against wall. Stretch to resize.
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PShr.chm!#33958
`CToilet,Stall,Building,Core,lifts,floor,charts,stair,treads,landings
Built in Accessory ShapeType `-String value of User.ShapeType for reporting.
Restroom SubShapeType `0String value of User.SubShapeType for reporting.
Stall &Depth `?Choose a standard size from the list, or type in a custom size. 1200 mm.;1500 mm.;1800 mm.
Stall &Width `?Choose a standard size from the list, or type in a custom size. ` 700 mm.;800 mm.;900 mm.;1000 mm.
Built in Accessory
Restroom
%P&roperties
stall door
`oChoose a standard size from the list, type in a custom size, or select (Size Manually) to resize using handles. Door &Width 500 mm;600 mm;700 mm;800 mm
Reverse &Left/Right Opening FlipX
Reverse &In/Out Opening FlipY
toilet
Standard sized wall toilet.
Vis_PShr.chm!#26904 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`QToilet,Standard,sized,wall,Building,Core,lifts,floor,charts,stair,treads,landings
Toilet SubShapeType `0String value of User.SubShapeType for reporting.
List of options Enter the manufacturer's color.
Toilet
Standard sized wall urinal.
Vis_PShr.chm!#26905 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
urinal
`QUrinal,Standard,sized,wall,Building,Core,lifts,floor,charts,stair,treads,landings
Urinal SubShapeType `0String value of User.SubShapeType for reporting.
Urinal
Cabinet Cabinet
Vault dimensions can be specified.
ions.
d@BK
Vis_PShr.chm!#26906 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
vault
`QVault,dimensions,specified,Building,Core,lifts,floor,charts,stair,treads,landings
Width Set the vault width.
`?Enter the measurement from the wall to the face of the cabinet. Depth
`%Set the wall thickness for the vault. Wall Thickness
Cabinet ShapeType `-String value of User.ShapeType for reporting.
Vault SubShapeType `0String value of User.SubShapeType for reporting.
Top elevation `;Enter the measurement from the floor to the top of cabinet.
Height `1Enter the measurement from the bottom to the top.
Cabinet type ID `2Enter the project ID for the type of construction.
Cabinet
Vault
Elevator dimensions can be specified. Rear door can be shown or hidden.
Vis_PShr.chm!#26887 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Hide Rear Door Show Rear Door User.RearDoor
Prop.DoorWidth Prop.DoorWidth
elevator
Prop.Height User.MinHeight
`kElevator,dimensions,specified,Rear,door,shown,hidden,Building,Core,lifts,floor,charts,stair,treads,landings
Show Rear Door
Cab Door Width (Minimum of 1000MM.)
Cab Height (Minimum of 2600MM.)
Cab Depth (Minimum of 2000MM.)
Cab Width (Minimum of 2300MM.)
Elevator
Cab Width (Minimum of `-Enter the desired width for the elevator cab.
Cab Depth (Minimum of `-Enter the desired depth for the elevator cab.
Cab Height (Minimum of `.Enter the desired height for the elevator cab.
Cab Door Width (Minimum of `2Enter the desired width for the elevator cab door.
Elevator SubShapeType `0String value of User.SubShapeType for reporting.
C@Fi4 Reposition Text
Vis_PShr.chm!#26889 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
elevator, freight
Prop.DoorWidth
`sFreight,elevator,dimensions,specified,Rear,door,shown,hidden,Building,Core,lifts,floor,charts,stair,treads,landings
Cab Depth (Minimum of 2600MM.)
Cab Height (Minimum of 2400MM.)
Cab Door Width (Minimum of 1200MM.)
I@Fi4 Reposition Text
Flow Segment Flow Segment
Chute diameter can be specified.
hute diameter.
Vis_PShr.chm!#26883 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Diameter `'Set the diameter of the selected chute.
Flow Segment Shape type `-String value of User.ShapeType for reporting.
Duct Segment SubShapeType `0String value of User.SubShapeType for reporting.
Angle Angle.
Duct to radius ratio Duct to radius ratio.
End type End type.
Length Length.
Segment type Select a type from the list.
chute
`OChute,diameter,specified,Building,Core,lifts,floor,charts,stair,treads,landings
Flow Segment
Duct Segment
Guardrail post separation can be specified.
Vis_PShr.chm!#26890 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
User.PostNum User.PostNum
guard rail
`eGuard,rail,Guardrail,post,separation,specified,Building,Core,lifts,floor,charts,stair,treads,landings
Minimum Post Separation `"Enter the minimum post separation.
Maximum Post Separation `"Enter the maximum post separation.
Guardrail SubShapeType `0String value of User.SubShapeType for reporting.
Guardrail
Slab Slab
Loading dock. Stair, ladder, and dock leveler can be shown or hidden.
Vis_PShr.chm!#26892 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Hide Stair Show Stair User.ShowStair User.ShowLadder
Hide Ladder Show Ladder User.ShowLadder User.ShowStair
Hide Dock Leveler Show Dock Leveler User.ShowLeveler
Q(-DT Q(-DTû Q(-DTû ÀQ(-DT
Fpyq
Controls.X1 Width-0
Controls.Y1 Height-0
loading dock
`_Loading,dock,Stair,ladder,leveler,shown,hidden,Building,Core,lifts,floor,charts,treads,landings
Loading Dock Width `%Enter the width for the loading dock.
Top elevation `QEnter the top of slab elevation relative to this building floor's base elevation.
Thickness `AEnter the measurement from the top surface to the bottom surface.
Slab type ID `2Enter the project ID for the type of construction.
Slab type Select a type from the list.
Show Stair
Show Ladder
Hide Dock Leveler
Adjust Dock Angle
rE@F% Reposition Text
Guide
TheDoc
Page-1
Gesture Format
Building
Ornamental stair
IFCPropsInvisible
FlightRun
TreadNumber
Ornament
ShapeClass
ShapeType
SubShapeType
Classification
ClassificationSource
StairPurpose
FireRating
ExitStair
MinTreadWidth
MinHandrailExtTop
MinHandrailExtBot
MinStairWidth
OrnamentPosition
HandleGuard1
MinRunLength
MaxTreadNumber
ActualTreadNumber
ActualTreadWidth
ShowTread16
ShowTread32
HideRail
HideBreak
BottomHandrailExtension
TopHandrailExtension
HandleGuard2
FullAngle
MidAngle
HandleGuard3
HandleGuard4
3D_type
3D_model_id
GetAngle
MidXformX
MidXformY
FullXformX
FullXformY
AntiScale
HasText
visKeywords
visVersion
SolSH
BaseX
BaseY
Scissor staircase
StairSeparation
Hide1
Hide2
HideSegment
SwapDir
StaggerCtls
DoStaggerCtls
GuardHeight
WatchCHRight
WatchCHLeft
SwapCtls
DoSwapCtls
GuardFlightWidth
SwapCtl1
DoSwapCtl1
Arrow1Begin
StaggerStep
MinFlightSeparation
FltSep
Arrow2Begin
RailRightX
RailLeftX
RailRightMin
RailLeftMin
WatchSwap
ArrowLoc
Straight staircase
HideTopBottom
BreakFillerControl
TopVisControl
BottomVisControl
BreakVisState
HideTop
HideBottom
DoHide
Spiral staircase
AskOnDrop
Hide
HandrailVis
SetAscending
MinFlightWidth
WatchSize
Calculated stairs
Floor2FloorHt
IdealRiser
NumberOfRisers
ActualRiser
Tread
SRatio
Text_1
Text_2
Text_3
Stair section
MinStairRun
WatchCH
NumberOfSteps
StepRise
StepRun
FlightRise
FlightHeadRoom
Stair direction
Index
Text
Stair landing
Length
StepNum
FlightSep
Thickness
Headroom
TopElevation
MinWidth
FlightWidth
TreadWidth
Stagger
MinFlightSep
Corner landing
NumSteps
Square
Manufacturer
ModelID
ModelName
OptionsList
CatalogURL
BaseElevation
SetDescending
Facilities
Hand rail
Railthickness
FromWall
Type
Slope
HideDims
RampPattern
RampColor
RampTooHigh
SubType
SubType2
RampPurpose
HandicapAccessible
Washroom counter 1
IsManualWidth
IsManualDepth
SetWidth
SetDepth
Depth
ProjectType
TypeDescription
Washroom counter 2
IsManualHeight
SetHeight
WatchCH1
WatchWidth
WatchHeight
Countertop sink
Color
Corner hand rail
Toilet stall
visStallWidth
visStallLength
3D_offset
3D_extrude_length
PanelThickness
heightAdjustment
visDoorWidth
DoorWidth
MinDepth
MinThickness
MaxThickness
WallThickness
Elevation
RearDoor
MinHeight
GuardDoorWidth
DoorWidthMin
GuardCabHeight
Freight elevator
Chute
LineStyleIndex
Diameter
Angle
DuctToRadiusRatio
EndType
SegmentType
MinDiameter
MaxDiameter
Offset
Guard rail
PostNum
PostSep
GuardSep
PostSize
MinSep
MaxSep
Loading dock
ShowStair
ShowLadder
ShowLeveler
SafetySize
XformX
XformY
Hypotenuse1
Leg1
DockWidth
TopOfSlabElevation
SlabType